August 11, 2009

TRAFFIC LIGHTS

9:09 PM  Sabarish  No comments

TRAFFIC LIGHTS

  • As well as the 4017 chip you will need a Hex (6) INVERTER and a Quad (4) AND gate chip.
  • Don't forget that all three chips need power connected to the correct pins.
  • The six diodes are Light Emitting Diodes (LED's).
  • The 470k and 4.7 uF control the speed at which the lights change

Posted in:

0 comments:

Post a Comment

DOOR BELL FOR DEAF CLICK HERE

Electronics is the study and use of electrical that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves. and semiconductors. The pure study of such devices is considered as a branch of physics, while the design and construction electronic circuits to solve practical problems is called electronic engineering.

Popular article

  • Small FM Transmitter
    Small FM Transmitter Nothing critical here. To get a bit of tuning out of the coil you could put a 4-40 pF trimmer capacitor (optional) p...
  • Mobile phone call indicator
    Purpose This circuit can be used to escape from the nuisance of mobile phone rings when you are at home. This circuit will give a visual...
  • Remote Control IR Transmitter
    Program IR Transmitter This project is based on integrated circuit from Holtek HT6221/HT6222. Similar parts used to be produced by NEC Se...
  • Doorbell for the Deaf
    Doorbell for the Deaf This circuit provides a delayed visual indication when a door bell switch is pressed. In addition, a DPDT switch can ...