Geomagnetic Field Detector
This basic oscillator will detect the Earth magnetic field. The ferrite rod and coil are taken from an old Medium Wave receiver and a small magnet is glued at one end. Tune to a medium wave commercial station until you hear a beat note. Any movement of the ferrite rod will produce an audible note that depends on the prevailing Earth magnetic field. Screening is essential. Use a plastic box padded, on the inside, with copper wires running parallel to the rod and grounded in one place only. A small hole is made in the box in order to adjust the trimmer capacitor with a plastic screwdriver. An American equivalent to the BC337 could be the 2N2369A but I did not try it out.
Circuit Diagram
July 25, 2009
Geomagnetic field detector
Electronics is the study and use of electrical that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves. and semiconductors. The pure study of such devices is considered as a branch of physics, while the design and construction electronic circuits to solve practical problems is called electronic engineering.
Popular article
-
Purpose This circuit can be used to escape from the nuisance of mobile phone rings when you are at home. This circuit will give a visual...
-
TFT The TFTs in active-matrix LCD act as simple ON/OFF switches, at different speeds which depend on the refresh rate of the LC...
-
In real this is how an TRANSFORMER looks like.. the transformer is a device that transfers electrical energy from one end of the coil to th...
-
In real this is how an rheostat like.. A rheostat is an electrical component that has an adjustable resistance Introduction : It is a type ...
0 comments:
Post a Comment