September 19, 2009

COMMON EMITTER CONFIUGRATION

10:23 PM  Sabarish  No comments

INTRODUCTION..

The COMMON-EMITTER CONFIGURATION (CE) is the most frequently used configuration in practical amplifier circuits, since it provides good voltage, current, and power gain. The input to the CE is applied to the base-emitter circuit and the output is taken from the collector-emitter circuit, making the emitter the element "common" to both input and output. The CE is set apart from the other configurations,
because it is the only configuration that provides a phase reversal between input and output signals.


CIRCUIT DIAGRAM..

http://img222.imageshack.us/img222/4999/141791082k.jpg
PURPOSE....

The COMMON-BASE CONFIGURATION (CB) is mainly used for impedance matching, since it has a low input resistance and a high output resistance. It also has a current gain of less than 1. In the CB, the input is applied to the emitter, the output is taken from the collector, and the base is the element common to both input and output

Posted in:

0 comments:

Post a Comment

DOOR BELL FOR DEAF CLICK HERE

Electronics is the study and use of electrical that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves. and semiconductors. The pure study of such devices is considered as a branch of physics, while the design and construction electronic circuits to solve practical problems is called electronic engineering.

Popular article

  • Semi Log Graph Sheet
    Semi Log Graph They are mainly used for plotting very LARGE and very SMALL value in a same graph Notice that the numbers along the x axis a...
  • MOSFET
    Introduction:- The metal–oxide–semiconductor field-effect transistor ( MOSFET , MOS-FET , or MOS FET ) is a device used to amplify or s...
  • Conversion from Decimal to Others
    Decimal TO Binary Comparison with descending powers of two and subtraction List the powers of two in a "base 2 table" from righ...
  • SR Flip Flop
    An SR Flip-Flop can be considered as a basic one-bit memory device that has two inputs, one which will "SET" the device and anot...