Geomagnetic Field Detector
This basic oscillator will detect the Earth magnetic field. The ferrite rod and coil are taken from an old Medium Wave receiver and a small magnet is glued at one end. Tune to a medium wave commercial station until you hear a beat note. Any movement of the ferrite rod will produce an audible note that depends on the prevailing Earth magnetic field. Screening is essential. Use a plastic box padded, on the inside, with copper wires running parallel to the rod and grounded in one place only. A small hole is made in the box in order to adjust the trimmer capacitor with a plastic screwdriver. An American equivalent to the BC337 could be the 2N2369A but I did not try it out.
Circuit Diagram
July 25, 2009
Geomagnetic field detector
Electronics is the study and use of electrical that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves. and semiconductors. The pure study of such devices is considered as a branch of physics, while the design and construction electronic circuits to solve practical problems is called electronic engineering.
Popular article
-
In real this is how an LDR looks like.. A Light Dependent Resistor (aka LDR, photoconductor, or photocell) is a device which has a resist...
-
Automatic Headlight Brightness Switch Driving the highway with your high-beam headlights can really increase your visibility, but can he a b...
-
Transistor tester circuit Description Here is a very simple circuit that can b e used to check the hfe of transistors. Both PNP and NPN ...
-
Drinking Water Alarm The many States supply water for limited duration in a day. Time of water supply is decided by the management and the p...
0 comments:
Post a Comment